Electrical holding magnets
Hyab stocks a large variety of electromagnets such as lifting magnets, holding magnets
and pull / push magnets. Holding magnets are used for lifting or fixating details.
Our standard assortiment are constructed for 24VDC, 100%ED.
The difference between holding magnets and liftmagnets is that holding magnets do not
have a safety factor. Note that holding magnets releases at given strength (in ideal conditions).
Alwaysuse some margin.
Stated holding force applies in ideal conditions without safety factor.
Force: 1kg ~ 9.8Newton
Articleno | Ø [mm] | Thickness [mm] | Hold force [N] | Thread | Voltage [V] | Power [W] |
71-1020 | 20 | 20 | 39 | M4 | 24 | 4.5 |
71-1030 | 30 | 20 | 147 | M6 | 24 | 4 |
71-1040 | 40 | 26 | 392 | M6 | 24 | 4.6 |
71-1050 | 50 | 28 | 686 | M6 | 24 | 6 |
71-1060 | 60 | 30 | 980 | M8 | 24 | 8.2 |
71-1080 | 80 | 40 | 2350 | M8 | 24 | 19.3 |
71-1007 | 100 | 45 | 3430 | M10 | 24 | 23.8 |
![]() |
Articleno | Ø [mm] | Thickness [mm] | Hold force [N] | Thread | Voltage [V] | Power [W] |
71-0025 | 25 | 20 | 135 | M4 | 24 | 3.2 |
M7102 | 32 | 22 | 225 | M4 | 24 | 3.4 |
M7103 | 32 | 22 | 225 | M5 | 24 | 3.4 |
71-0040 | 40 | 25.5 | 390 | M5 | 24 | 5.3 |
M7104-12V | 50 | 27 | 685 | M5 | 12 | 7 |
M7104 | 50 | 27 | 685 | M5 | 24 | 7 |
71-0065 | 65 | 30 | 980 | M8 | 24 | 10 |
71-0006 | 80 | 38 | 2150 | M8 | 24 | 17.2 |
71-0007 | 100 | 43 | 3330 | M10 | 24 | 25 |
71-0008 | 150 | 56 | 4600 | M16 | 24 | 37.5 |
71-0009 | 180 | 63 | 7500 | M24 | 24 | 50 |
71-0010 * | 250 | 80 | 25490 | M24 | 24 | 120 |
* It is possible to customize your product to other voltages.
For example, this shown below is 230 VAC with rectifier in the steel housing.
Articleno | Ø [mm] | Thickness [mm] | Hold force [N] | Thread | Voltage [V] | Power [W] |
71-0001 | 25 | 20 | 130 | M4 | 24 | 3.1 |
71-0002 | 40 | 27 | 340 | M5 | 24 | 4.4 |
71-0003 | 52 | 30 | 490 | M5 | 24 | 7 |
71-0004 | 70 | 35 | 1000 | M8 | 24 | 11.7 |
71-0005 | 80 | 38 | 1300 | M8 | 24 | 18 |