Your shopping cart is empty!
Permanent magnets / Smco/Sm2Co17 / Ring
Our products may have abbreviations that usually has very important significance.
|
|
| NPM | North-Pole-Marked (A colored marking on the side which is N). |
|
|
|
|
Tolerance. Example: 3(+0.1) |
The tolerance is +0.1mm. Minustolerances can occur. For example: 3(+-0.1). |
|
|
|
| Grader/deg/degrees |
If the product has a counterbore, this will tell u how many degrees the counterbore is. Most often the counterbore is 90 degrees. |
|
|
|
|
Counterbore For example: Ring N36 15x(3.1+6)x8mm Ni |
This means that the counterbore is 3.1+6mm. The hole has a Diameter of 3.1mm and from 3.1mm goes out to 6mm. In most cases the product has a drawing in the description. |
|
|
|
Axial(1) and Diametrical(2) magnetization
Always axial magnetization unless otherwise stated!
Outer ØD [mm]
- mm
Inner Ød [mm]
- mm
Thickness [mm]
- mm
| Article No | Outer ØD [mm] | Inner Ød [mm] | Thickness [mm] | Request for Offer |
|---|---|---|---|---|
| 32-0108-10 | 10 | 4 | 3 |
|
| 32-0150-10 | 8 | 4.5 | 3 |
|
| 32-0153-10 | 10 | 4.5 | 5 |
|
| 32-0101-10 | 3 | 1.5 | 3 |
|
| M5114 | 10 | 3 | 4 |
|
| M5115 | 14.2 | 10.8 | 2.6 |
|
HYAB Magneter AB © 2018
Ranhammarsvägen 5 168 67 Bromma Sweden
Tel:+46 8 26 10 80 · Fax: +46 8 26 04 60 · E-Mail: [email protected]
Ranhammarsvägen 5 168 67 Bromma Sweden
Tel:+46 8 26 10 80 · Fax: +46 8 26 04 60 · E-Mail: [email protected]
